湖北农业科学 ›› 2024, Vol. 63 ›› Issue (4): 141-147.doi: 10.14088/j.cnki.issn0439-8114.2024.04.026

• 贮藏·加工 • 上一篇    下一篇

基于AHP-CRITIC法结合星点设计优选壮药骆芡愈巴布剂成型工艺

谢孟姣a, 郭勇秀a, 赖信宏a, 李芳婵a, 黄茵a, 黄艾艾a, 王雅琴a, 黄雪婷a, 蒋林a,b   

  1. 广西中医药大学,a.药学院; b.壮瑶药工程技术中心,南宁 530001
  • 收稿日期:2021-12-27 出版日期:2024-04-25 发布日期:2024-05-07
  • 通讯作者: 蒋林(1965-),男,广西荔浦人,教授,主要从事新药及保健食品的研发工作,(电话)18677155109(电子信箱)1429420232@qq.com。
  • 作者简介:谢孟姣(1998-),女,湖南祁东人,硕士,研究方向为新药及保健食品,(电话)18376702350(电子信箱)1799626428@qq.com。
  • 基金资助:
    广西重点研发计划项目(桂科AB1850022); 南宁市重点研发计划项目(20193117)

Optimization of forming process of Zhuang medicine Luoqianyu cataplasm based on AHP-CRITIC method combined with star design

XIE Meng-jiaoa, GUO Yong-xiua, LAI Xin-honga, LI Fang-chana, HUANG Yina, HUANG Ai-aia, WANG Ya-qina, HUANG Xue-tinga, JIANG Lina,b   

  1. a. College of Pharmacy; b. Zhuang Yao Medicine Engineering Technology Center, Guangxi University of Chinese Medicine, Nanning 530001,China
  • Received:2021-12-27 Online:2024-04-25 Published:2024-05-07

摘要: 以初黏力、持黏力及综合感官评价为考察指标,通过AHP-CRITIC混合加权法确定各指标的权重并计算综合评分,采用星点设计-响应面法优选壮药骆芡愈巴布剂的最佳成型工艺。结果表明,壮药骆芡愈巴布剂空白基质最佳处方为NP-700 1.6 g、微粉硅胶1.0 g、甘羟铝0.8 g、甘油12.0 g、卡波姆940 0.5 g、CMC-Na 0.5 g 、EDTA-2Na 26 mg、去离子水10 mL;制备方法为NP-700、微粉硅胶、甘羟铝置于甘油中溶胀,作为A相,EDTA-2Na溶于去离子水中,加卡波姆940、CMC-Na溶胀,作为B相,将A相加入B相中搅拌均匀,得到的空白基质与处方量药膏搅拌均匀即得。优选得到的制备工艺稳定可行,实际生产可操作性大,可用于壮药骆芡愈巴布剂的制备。

关键词: 壮药骆芡愈巴布剂, AHP-CRITIC, 星点设计, 成型工艺

Abstract: Taking the initial viscosity, holding viscosity and comprehensive sensory evaluation as indexes, the weight of each index was determined by the AHP-CRITIC mixed weighting method, and the comprehensive score was calculated. The star design-response surface method was used to optimize the best forming process of Zhuang medicine Luoqianyu cataplasm. The results showed that the best blank matrix formulation of Zhuang medicine Luoqianyu cataplasm was NP-700 of 1.6 g, silica gel powder of 1.0 g, dihydroxyaluminum aminoacetate of 0.8 g, glycerol of 12.0 g, carbomer 940 of 0.5 g, CMC-Na of 0.5 g, EDTA-2Na of 26 mg, and deionized water of 10 mL. The preparation method was as follows: NP-700, silica gel powder and dihydroxyaluminum aminoacetate were swelled in glycerol as phase A, EDTA-2Na was dissolved in deionized water, carbomer 940 and CMC-Na were swelled as phase B, phase A was added into phase B to stir evenly, and the resulting blank matrix was mixed evenly with the prescribed cream. The optimized preparation process was stable and feasible, and the actual production was operable, which could be used for the preparation of Zhuang medicine Luoqianyu cataplasm.

Key words: Zhuang medicine Luoqianyu cataplasm, AHP-CRITIC, star design, forming process

中图分类号: