湖北农业科学 ›› 2021, Vol. 60 ›› Issue (14): 133-137.doi: 10.14088/j.cnki.issn0439-8114.2021.14.024

• 农业工程 • 上一篇    下一篇

烟台市日光温室围护结构构造优化分析

吴兴国, 袁行健, 徐皓, 尹宝全, 马云飞   

  1. 中国农业大学烟台研究院,山东 烟台 264670
  • 收稿日期:2021-03-29 出版日期:2021-07-25 发布日期:2021-08-09
  • 通讯作者: 马云飞(1976-),男,山东烟台人,教授,博士,主要从事设施园艺工程方面的研究,(电子信箱)pony521ff@163.com。
  • 作者简介:吴兴国(2000-),男,山东聊城人,在读本科生,研究方向为设施农业科学与工程,(电话)15963177665(电子信箱)15963177665@163.com
  • 基金资助:
    农业农村部农业行业管理项目(121821301124031209); 中国农业大学烟台研究院大学生URP计划(U20193022)

Optimal analysis of enclosure structure of solar greenhouse in Yantai city

WU Xing-guo, YUAN Xing-jian, XU Hao, YIN Bao-quan, MA Yun-fei   

  1. Yantai Institute of China Agricultural University,Yantai 264670,Shandong,China
  • Received:2021-03-29 Online:2021-07-25 Published:2021-08-09

摘要: 对烟台常见日光温室的模型参数进行设计,通过日光温室热环境分析软件对不同后墙与后屋面构造的日光温室模型进行模拟优化。结果表明,在烟台市地域气候条件下,日光温室后墙采用370 mm水泥砖砌块+70 mm聚苯板+120 mm加气混凝土砌块、后屋面采用薄膜+100 mm挤塑板+30 mm厚水泥砂浆抹面保护层时,日光温室室内热环境性能较好。

关键词: 日光温室, 围护结构构造, 热环境模拟

Abstract: The model parameters of common solar greenhouse in Yantai was designed in order to manifest that indoor thermal environment of greenhouses performs better for certain parameters in local climate condition through analyzing simulated optimization of different construction of wall and rear slope of greenhouses by analysis software. The results suggested that the optimal parameters of wall should be cement bricks of 370 mm, polystyrene foam plastics of 70 mm and aerated concrete blocks of 120 mm and the rear slope should be plastic film of 100 mm, extruded board of 30 mm and cement mortar as its protective layer.

Key words: solar greenhouse, construction of enclosure structure, simulation of thermal environment

中图分类号: