HUBEI AGRICULTURAL SCIENCES ›› 2025, Vol. 64 ›› Issue (1): 150-153.doi: 10.14088/j.cnki.issn0439-8114.2025.01.024

• Agricultural Engineering • Previous Articles     Next Articles

Design and testing of the peel off device for the elastic tooth chain rake residual film recycling machine

HE Yu-ze, WANG Min, CAO Si-lin, YING Yu-kun, LU Yong-tao, WANG Ji-liang   

  1. Mechanical Equipment Research Institute, Xinjiang Academy of Agricultural and Reclamation Science, Shihezi 832000, Xinjiang, China
  • Received:2024-03-15 Published:2025-02-20

Abstract: In response to the problems of incomplete film removal and low reliability in the elastic tooth chain rake residual film recycling machine, a fixed scraper type peel off device was designed, and its key components were designed and analyzed. To verify the operational performance of the peel off device, an L9(34) orthogonal experiment was conducted with the driving speed of the machine (A), the length of the spring teeth (B), and the angle between the spring teeth and the delamination plate (C) as experimental factors, and the delamination rate as the experimental indicator. The results showed that the delamination rate of the elastic tooth chain rake residual film recycling machine was 92.5% to 95.7%;the range analysis showed that the influence magnitude of each factor was A>C>B. The optimal experimental condition combination for the delamination rate was A2B1C2, which meant that the machine’s driving speed was 8 km/h, the length of the spring teeth was 160 cm, and the angle between the spring teeth and the delamination plate was 50°. Validation tests were conducted on the optimal combination (A2B1C2) for 5 times, with an average delamination rate of 95.16%, meeting the operational requirements of the the elastic tooth chain rake residual film recycling machine.

Key words: elastic tooth chain rake residual film recycling machine, peel off device, homework performance, design

CLC Number: